Skip to main content

AIR PRESSURIZED Dry Standpipe Sign (Aluminium Reflective Signs, White 4x12)

$9.97
Availability:
USUALLY SHIP WITH IN 1-2 BUSINESS DAY
Adding to cart… The item has been added

Description

AIR PRESSURIZED DRY STANDPIPE SIGN

Size: 4x12

Material: Aluminum

Color: White

 

Our standpipe signs – Design to inform 1st responded about the standpipe system in the building and their locations. A Standpipe system is a series of pipes which connect a water supply to hose connections, basically an extension of the fire hydrant system. They are designed to provide a pre-piped water system for building occupants or the fire department.

A standpipe system is An arrangement of piping, valves hose connections and other equipment installed in a building or structure, with the hose connections located in such a manner that water can be discharged in streams through attached hose and nozzles, for the purposes of extinguishing a fire, thereby protecting a building or structure and its contents in addition to protecting the occupants. This is accomplished by means of connections to water supply systems or by means of pump tanks and other equipment necessary to provide an adequate supply of water to the hose connections.”

It is, essentially, a way of delivering water from one area of the structure or facility to another so that we can fight the fire while at the same time shortening the length of the supply and attack lines. Standpipes can be an intricate or simple system, but the result is the same: water delivery. These systems can be vertical (which is the common type) or they can be horizontal.   

Below are four types of standpipes that you will find in use:

  • Wet system. Here, water is in the pipes at all times and is supplied by a water source. The pressure in the system is constantly maintained.
  • Automatic dry standpipe. Here, there is always air stored inside the standpipe at a constant pressure. When a hose valve is opened, the air escapes allowing the water to enter into the standpipe system.
  • Semi-automatic dry standpipe. In this system, air is stored inside the pipes, which can be pressurized or not be pressurized. Once an actuation device such as a manual pull station or an electrical switch is activated, water then enters the system.
  • Manual dry standpipe. This type of system has only pipes feeding the system with no air or water in them. A fire apparatus must be used to supply the water through the standpipe.

 

Dry Standpipe Signs are designed to inform fire department officers and concerned parties of the type of sprinkler system in the building at hand. A dry standpipe system presents a network of in-place pipework allowing connections between a water supply (usually a fire department mobile apparatus known as a pumper) and a dedicated inlet at street level; With hose outlet valves on each floor.

 

Frequently asked Questions about dry standpipe and standpipe systems:

What is a dry standpipe ? With dry standpipes, the standpipe extends into the building to supply fire fighting water to the interior of the structure via hose outlets; Often located between each pair of floors in stairwells in high- rise buildings, dry standpipes are not filled with water until needed.

What is a manual dry standpipe? Automatic Dry Standpipe systems are only designed to have water in the system piping when the system is in use. Manual Dry Standpipe systems are for fire department use exclusively and require a fire department pumper to supply the needed pressure and water supply through a fire department connection

 

There are four types of standpipes that you will find in use:
·         Wet system with water in the pipes at all times; It is supplied by a water source. The pressure in the system is maintained constantly.
·         Automatic dry standpipe with air stored always inside the standpipe at a constant pressure; When a hose valve is opened, the air escapes allowing the water to enter into the standpipe system.
·         Semi-automatic dry standpipe with air stored inside the pipes, which can be either pressurized or not pressurized; With it water then enters the system, when an actuation device such as a manual pull station or an electrical switch is activated.
·         Manual dry standpipe system only with pipes feeding the system; With neither air nor water in them; For water to be supplied through the standpipe, a fire apparatus must be used.
 

Shipping and Handling Cost:

Our Shipping is fixed whether you buy 1 item or 20 items (We ship within USA only) - do not miss this opportunity to buy all signs needed at no additional shipping cost.

 

Sales Tax:

We are required to collect sales tax on any product sold on this site and shipped to an address in New York. The sales tax is 8.875 percent.

 

DISCLAIMER
We are a small, family-owned and family-operated Brooklyn-based business. We are not a City of New York store, nor are our website, products, or services affiliated with the City of New York or any agency of the City of New York. Neither we, nor our business, websites, products, services, or any hyperlinks from our website are sponsored by, approved by, affiliated with, endorsed by, or connected to the City of New York or any agency of the City of New York, including but not limited to HPD, DOB, DOT, DSNY, FDNY, or any federal entity, directly or by implication.

DISCLAIMER ON LEGAL CODES
The codes, regulations, and requirements referenced on our website may not represent the most recent or updated versions. State, federal, or local regulatory agencies may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information provided on this site or linked from it. Customers should verify all information by reviewing the official sources directly.

DISCLAIMER ON SIGN USE
The requirements for sign content depend on intended use and applicable laws. The buyer is solely responsible for determining the appropriate content for a sign or package of signs. We make no warranty or representation regarding the suitability of any sign for a specific application. It is the customer’s responsibility to ensure that the signs ordered are in compliance with all applicable state, federal, local, and municipal laws. Customers are encouraged to carefully review our Terms and Conditions prior to purchase.

GENERAL INFORMATION DISCLAIMER
All content on this site is provided for informational purposes only and does not constitute legal advice, professional advice, or a definitive statement of law. For guidance on specific requirements, customers should consult the laws and regulations referenced, as well as any rules applicable in their jurisdiction. You may wish to consult with an attorney or qualified professional to ensure compliance with all applicable legal obligations.